Description

Electric Boat DIY Kit with 100KV 200KV 120116 Motor 500A ESC with Twist Throttle Catamaran Motorized Boats Electric Outboard Jetski Yacht Combo

Different Options:

MTI120116-SF 200KV Watercooled motor + MTSF500A-WP ESC + MTAP22 Signal convertor + MTW1702 Twist throttle
MTI120116-SF 200KV Waterproof motor + MTSF500A-WP ESC + MTAP22 Signal convertor + MTW1702 Twist throttle
MTI120116-SF 200KV Waterproof motor + MTSF500A-WP ESC + MTAP22 Signal convertor + MTW1702 Twist throttle

Note:

In this kit, the ESC can use max voltage is 14S Lipo (58.8V)

And motor can withstand max about 10000 RPM, so if use 200KV, please use voltage under 50V.

-Motor: MTI12016 Watercooled / Waterproof Sensorless Inrunner BLDC Motor

Model No.: MTI120116-SF / MTI120116-WPKV: 100KV / 200KVShaft: Keyway ShaftInput Volt: In this kit, 100KV max to 60V, 200KV max to 50V. Max RPM: No more than 10000Max Current: 380AMax Output Watt: 18.8KWMax Torque: 20.6N.mHall Sensor: WithoutTemp Sensor: With NTC10k thermister Cooling Way: Watercooled version to be cooled through cooling tube, waterproof version cooled directly by waterNet Weight: About 4.76kg/pcs

100KV Test Datasheet:

-ESC: MTSF500A-WP Waterproof & Watercooled 500A ESC Speed Controller, with Internal 5V and 12V DC-DC Module, with 36V 48V 60V Twist Throttle and Signal ConvertorModel No.: MTSF500A-WP with Twist Throttle and signal convertorCont Current: 500AMax Current: 1000AWaterproof Rank: IP68 WaterproofWatercooling: Yes, withInput Volt: 6-14S Lipo (24V-58.8V)BEC: Built 5V and 12V DC-DC Module, support water pump and lampSignal Format: Covert from ADC to PWM (PPM)Signal Output: 1-2msCase Material: Alloy aluminum caseNet Weight: 3.6kg/setCooling Way: By water directly or by water pump through water cooling tubeConnector: Standard is 10.0mm golden female connector on motor cable side, battery size is not with connector, with IP68 waterproof protector for connectorsApplication: Electric surfboard, electric boat, motorized boat, boat from oil power to electric powered, fishing boat, outboards, yacht, jetski, catamaran, etc.,
Questions You May Ask:

Can I put the ESC underwater directly? Is it ok to work in sea water?

–Yes, the ESC is with waterproof case, you can put underwater directly, it can use work in sea water, but because sea water has corrosion, to expand the ESC lifespan, please use fresh water to clean the sea water on the surface, and put the ESC for all dry for next time use.

I don’t want to put the ESC underwater directly, what should I do?

–If you don’t want to put the ESC underwater, don’t worry, it’s also watercooled, you just need to connect a water pump to cooling the ESC, and if so, please order the kit with 2 sets water pump, each motor pump can only cool for 1 item, in this kit the motor is watercooled also needs water pump for cooling.

With Progcard, below parameters are adjustable by progcard:

Click here for progcard manual.

Advice for Usage:1. To expand the products life, please better wipe off the waters on the products and keep them for all dry after everytime use. 2. For this kit of the ESC, because the motor is sensorless, suggest to use the default value in the ESC, we have tested the kit before shipment with the default value, do not suggest to modify the values.
About Stock: 1. Standard stock for the motor is 100KV and 200KV with keyway shaft as picture, if you want other KV lead time is about 60-90 days after your order confirmed, and please contact us [email protected] to tell us your requirement. 2. The standard stock is also limited, please confirm your order asap, and if you need very urgent, please contact us [email protected] to check stock first. 3. The ESC waterproof case and inner circuit are handmade by our engineer, it will be start make after your order confirmed, takes about 5-10 days after your order confirmed, but the material are limited, so please better confirm your order earlier. Any other questions and requirements, contact us [email protected]